- Distributed Systems
- Program Behavior
- Mobile & Sensing
- Social Networks
- TRAC is gone
GENI Cognitive Radio Platform
The GENI Cognitive Radio Platform is an active development project that involves ground-up design and deployment of a highly programmable, frequency agile, multi-FPGA, wideband cognitive radio which will be connected to the GENI testbed framework. The basic idea behind this initiative is to make the platform accessible to other researchers using internet to run cognitive radio experiments in a realistic network. CU has teamed up with Rutgers University and Radio Technology Systems in this initiative to build this next generation testbed of cognitive radios.
Following is a demonstration of the latest version of the radio, which can be tuned from 100MHz to 7.5GHz.
The earlier version of the radio had the following features:
- Virtex5-LX50 FPGA – Acts as the motherboard for the baseband OFDM design and ADC/DAC and RF daughter cards.
- 100Mbps Ethernet to send control and data packet to and from the radio board.
- Tunable to 2.4GHz and 5GHz ISM band.
- Complete design and implementation of the OFDM pipeline is done using a combination Xilinx System Generator and ISE tools.
- Design capabilities include – Non-contiguous OFDM with fine grain control over modulation and bandwidth.
- Full transmit receive path implemented for OFDM based 802.11a/g packets.
- Backward compatible with standard off the shelf Wi-FI cards.
We will continue to work on improving the prototype and add new features to achieve the ultimate goal of being a part of a global network testbed.
Nallatech XtremeDSP/Fidelity Comtech SDR
Prior to the GENI initiative, wirelesss@CU had been involved in development of basic software defined radio capable of demonstrating frequency agile techniques. The basic SDR was built as a hybrid design with partitioning of DSP algorithms into software and hardware components providing high flexibility as required in SDRs and cognitive radio. The development was carried out using a Nallatech XtremeDSP-IV kit with high speed ADC/DAC chip allowing wideband designs along with a RF front-end box that operates in the 2.4GHz.
Since its deployment in 2007-08, the prototype has been used in various experiments and resulted in a number of publications in the field of wireless networking, cognitive radio and radio architectures. Please refer to the publication list under various projects within the wireless@CU research group for more details on the design and development of the SDR prototype.
Tag cloudArchitecture optimization Radio security measurement prototype phased array deer cognitive radio cyberphysical sdr anonymity bia uas chainsaw OFDM geostatistics sampling modeling antenna coverage simulation pin privacy program analysis mobile Synchronization FPGA location networking wireless self-organization environment compilers sending atc hardware bit-torrent aircraft optiscope directional faa